Boost pH+ FAQ

Created by Adam Clayton, Modified on Wed, 8 Apr at 10:20 AM by Adam Clayton

What is Boost pH+?
Boost pH+ is a specialized supplement designed to raise pH in marine and reef aquariums without being used as a primary alkalinity solution.


What does Boost pH+ do?
It increases aquarium pH to a desired range (typically ~8.2–8.5), helping improve overall system conditions and coral growth potential.


Does Boost pH+ raise alkalinity?
It is designed to primarily affect pH, not alkalinity, when used in properly buffered systems. However, it should not be relied on to control or correct alkalinity levels.


When should I use Boost pH+?

  • When pH is consistently low despite proper alkalinity
  • In systems with excess CO₂ (closed rooms, heavy bioload, calcium reactors)
  • When other pH correction methods (aeration, outside air, refugium) are insufficient

When should I NOT use Boost pH+?

  • If alkalinity is below ~7 dKH (must correct first)
  • As a replacement for alkalinity supplements
  • Without testing pH and alkalinity

Low alkalinity must be corrected before using Boost pH+.


What pH level should I target?

  • Typical reef range: ~8.1–8.4
  • Advanced systems may target up to ~8.5
  • Avoid exceeding ~8.5–8.6, as this may stress livestock 

How do I dose Boost pH+?

  • Typical starting point: ~2 ml per 10 gallons
  • Add to a high-flow area
  • Re-test pH after dosing and adjust gradually
  • Do not exceed ~10 ml per 10 gallons per day 

How quickly does Boost pH+ work?
pH changes typically occur within minutes, with stabilization shortly after dosing.


How fast should I raise pH?

  • Do not increase pH more than ~0.2 per 24 hours
  • Gradual adjustment is critical to avoid stressing livestock 

Can I dose Boost pH+ daily?
Yes, but only after understanding your system’s response. Manual dosing is recommended before automating.


Can I use Boost pH+ with a dosing pump?
Not initially. It is recommended to manually dose first to understand how your system responds before automating.


Should I test before dosing?
Yes. Always test:

  • pH
  • Alkalinity

Boost pH+ is only effective when alkalinity is already within the proper range.


Can I overdose Boost pH+?
Yes. Overdosing can cause rapid pH spikes and stress or harm aquarium inhabitants. Always dose conservatively.


What problems does Boost pH+ help solve?

  • Chronically low pH
  • CO₂-related pH suppression
  • Systems where alkalinity is correct but pH remains low

Key positioning (this is critical for your AI)

  • pH adjustment tool (not alkalinity control)
  • Used AFTER alkalinity is already correct
  • Advanced / situational product—not daily baseline dosing for most users

Important distinctions:

  • Alkalin 8.3 → raises alkalinity + pH
  • Reef Code B → raises alkalinity (balanced system)
  • Boost pH+ → raises pH only (targeted use)

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article